Go Back   waterinjection.info > Other > Gallery - NEW

Thread Tools Display Modes
Old 20-05-2011, 05:24 AM
Junior Member
Join Date: Jan 2010
Location: australia
Posts: 3
Default My Evo IV install and results

here is my system in my Evo IV, I have a AEM pump, DDS3 V10 controller and a RCI 1 gallon fuel cell, bit of a mix n match but it is working well, I am running 2x .7mm jets one just after FMIC and one just before the TB.

results so far, before and after prev was 98 octane 1.8 bar, now 2 bar with the water/meth

motor is a built 2ltr, ported head, HKS 272 cams and FP White rabbit turbo plus the usual bolt ons

Evo IV built 2ltr 26psi FP white rabbit
241atwkw on pump 98
Reply With Quote
Old 04-12-2011, 10:23 AM
Richard L Richard L is offline
Manufacturer sponsor
Join Date: Oct 2003
Location: England
Posts: 4,916
Default Re: My Evo IV install and results

This is a good clean setup. Nice gain on power too.

Are you running tephra alt-map?
Richard L
aquamist technical support
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 11:21 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.