waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 12-08-2013, 01:38 PM
zx9rmania zx9rmania is offline
Junior Member
 
Join Date: May 2013
Location: europe
Posts: 10
Default Re: HFS4 on 996tt

now is ok, was a wrong wire....like 1.x-2V at idle.. As i thought i am injecting too much meth I put just one 0.5 injector and car still boggs when kicking in... it can not be too much meth i supose.... we were running a very low mix like 30meth/70water. AFRs are going like 10.7, i am targeting and reaching 11.8 AFR on pump only. With 2x1.2mm we measured up to 7-800cc/min flow, injectors are 80cc and IDC at 1.5bar is like 70% peaking 75% sometimes

My install was also validated by another user fo yours cipsony who owns a very nice and fast audi ttrs, thank you Ciprian !


A 0.5 injector for this engine could do so much harm ? Besides retuning ??, i dont know what to do, i am lost......
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:07 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.