waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Diesel

Reply
 
Thread Tools Display Modes
  #1  
Old 10-04-2015, 05:49 AM
Viperez Viperez is offline
Junior Member
 
Join Date: Apr 2015
Location: Hong Kong
Posts: 2
Default Kit for BMW F30 320d ed

Hi I am thinking of venturing into watermeth side of things, but frankly I know very little about it. Can anyone shed light on whether a kit would fit the application on BMW 320d ed? anything I might need to look into? say for instance any remap or other hardware would be prerequisite before installing water meth? the car is stock at the moment, at least on the engine side of things

Cheers
Reply With Quote
  #2  
Old 09-05-2015, 09:56 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,796
Default Re: Kit for BMW F30 320d ed

For diesel engine, adding wmi will make power almost instantly without tuning. Diesel just loves any form of fuel. It is similar to adding nitrous to gasoline engine.

It is important to regulate the amount of flow and keep the methanol percentage below 50% for minimise the onset of detonation. Ideally, wmi flow should mirror the fuel flow instead of boost because boost comes on full at very light load.
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 13-05-2015, 04:47 AM
Viperez Viperez is offline
Junior Member
 
Join Date: Apr 2015
Location: Hong Kong
Posts: 2
Default Re: Kit for BMW F30 320d ed

thanks so much for the reply, do aquamist have any kit for my car that you can recommend?
Reply With Quote
  #4  
Old 30-05-2015, 11:22 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,796
Default Re: Kit for BMW F30 320d ed

Yes, the HFS4 will work with your car.
__________________
Richard L
aquamist technical support
Reply With Quote
  #5  
Old 12-11-2016, 05:40 PM
Raymond Power Raymond Power is offline
Junior Member
 
Join Date: Oct 2016
Location: Malaysia
Posts: 5
Default Re: Kit for BMW F30 320d ed

Hi, I've just fitted a 1S system to my e60 530d with 0.5mm nozzle 100% water. The engine max boost is 1.65bar. I set the 1S pressure switch at 1 bar. Immediately ran a dyno and power drops. Any advise?
Reply With Quote
  #6  
Old 22-11-2016, 06:33 AM
blue blue is offline
Junior Member
 
Join Date: Jun 2009
Posts: 26
Default Re: Kit for BMW F30 320d ed

You need some meth in the mix
__________________
blue
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:26 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.