waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #21  
Old 14-12-2011, 12:40 AM
lil powell lil powell is offline
Junior Member
 
Join Date: Mar 2011
Location: Pearland
Posts: 17
Default Re: 997TT issues?

Quote:
Originally Posted by Richard L View Post
So far, all test results are positive.

The next test will be getting the two jets out of the charge pipe and watch the spray pattern and bars on the gauge, using the "SYS" test jumper. Don't do it more than a few seconds at a time.

PLease post results.
I pulled both jets out of the charge pipe, when I jump the "SYS" the gauge lit half the bars. But when I went to look at the spray pattern, the water shot out far and in a straight line like a super soaker. There was no cone pattern just a high pressure stream.
Reply With Quote
  #22  
Old 14-12-2011, 08:33 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: 997TT issues?

Thanks for the update...

I suspect the jet with a straight spray does not have an internal spinner or it is not screw down properly. Check the internal. Has the jet been serviced since the installation?

During this test, what is the "SC" set to?

Until this problem jet is working as designed, we cannot set the bargraph of the gauge properely.

The system appears to be work as it should besides the jets.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:16 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.