waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > General Effects

Reply
 
Thread Tools Display Modes
  #1  
Old 28-02-2013, 01:11 PM
andysharp andysharp is offline
Member
 
Join Date: Dec 2011
Location: dunfermline
Posts: 49
Default Perrin PW2 System Issues

hi folks

i have a Perrin PW2 System from Richard and recently had the car off the road for a month due to engine build for forged internals.

got the car back and now the water injection system isnt working at all. emailed you other day richard about it directly

pump wont turn over at all.

took the pump casing off and no rust on the top of it, unlike the last time that richard you will probably remember on my 207 GTI.

its going back to garage tomorrow to investigate, hoping its just a wiring issue like the ground wire not connected properly.

but if its the pump again, is this common when not using for a period of time?

could i upgrade to the aquamist pump http://www.aquamist-direct.com/806-5...r-hfs-2-3-4-6/ with the wiring setup for the Perrin PW2 System thats using a DDS3 V10 junction box?

this is how the system is set up this now...
junction box




full kit


Perrin Controller


set up on car


current wiring


on this the red, blue and black go to the power source, feed from MAP sensor and ground


hopefully we can get this sorted.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:02 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.