waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 19-07-2017, 09:40 AM
rotrex rotrex is offline
Senior Member
 
Join Date: Jan 2014
Location: Germany
Posts: 187
Default Re: Nozzle spray angle...

Again,
please measure the pressure after the throttle body before swapping air filters.
Only takes a few minutes and gets you a real idea how good or bad that or the new filter is.

You can literally route a silicone pipe through the passenger window. it is only a temporary measurement.
Hook up a analog gauge from eBay and record it with your cell phone. After than watching the gauge at WOT.

Just swapping and hoping things get better is the most expensive way to do things.
This is why most car dealers this days lost the art of properly diagnosing issues.
They read codes and swap expensive ECUs and other modules to only find that it was a single blown or corroded fuse socket in the end or water in spark plug holes.
They don't care and write you a 1000$ bill that should have been a $50 bill with common (car) sense.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 11:51 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.