waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Diesel

Reply
 
Thread Tools Display Modes
  #1  
Old 18-08-2009, 08:44 PM
harcombe harcombe is offline
Junior Member
 
Join Date: Aug 2009
Location: london
Posts: 2
Default wI on a TD5 Landrover ...still

evening gentle folk.

I am putting a 1S system on my TD5 landrover and am at the final stages of completion, I do however have one question about wiring.

I have a 806-288 race loom which I am condining with a DDS 3 V8 in car gauge. I notice that the DDS interface has a pair of contacts for a level switch whic I have fittedto the washer tank as a fail safe however the loom also has a pair of thin black wires with a connector on it which could in the absence of a DDS3 module be used on a float switch as a pump cut off.

As I have a DDS3 what do I do with these wires as they are part of the race loom???

all posts gratefully received :roll: :lol:
Reply With Quote
  #2  
Old 03-09-2009, 08:31 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default

If you have DDS3 gauge, you should have a separate water level sensor. The sensors should be wired and installed independently.
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 06-09-2009, 10:36 AM
harcombe harcombe is offline
Junior Member
 
Join Date: Aug 2009
Location: london
Posts: 2
Default

cheers richard

so the DDS water level sensor can over ride the loom float switch sensor...cool.

I guess I can just cut back and terminate.

thanks :lol:
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:55 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.