waterinjection.info  

Go Back   waterinjection.info > Other > Gallery - NEW

Reply
 
Thread Tools Display Modes
  #11  
Old 12-10-2004, 09:06 AM
PuntoRex PuntoRex is offline
Senior Member
 
Join Date: Mar 2004
Location: Taiwan
Posts: 75
Default Re: Some pics of my progress on Astra Coupe Turbo (56k bewar

Quote:
Originally Posted by Gelf
Hi Gelf,

May I ask where you get that jet adaptor from?
It seems a very nice fitting


Richard,

As my questions on the other post, do you provide this?


Thanks,
Rex :smile:
Reply With Quote
  #12  
Old 12-10-2004, 03:00 PM
Guest
 
Posts: n/a
Default Re: Some pics of my progress on Astra Coupe Turbo (56k bewar

Quote:
Originally Posted by PuntoRex
Quote:
Originally Posted by Gelf
Hi Gelf,

May I ask where you get that jet adaptor from?
It seems a very nice fitting


Richard,

As my questions on the other post, do you provide this?


Thanks,
Rex :smile:
Hi, Richard kindly supplied the adapters
Reply With Quote
  #13  
Old 05-11-2004, 05:02 PM
marck_c marck_c is offline
Junior Member
 
Join Date: Oct 2004
Posts: 6
Default

Richard, how can I get a hold of a couple of those jet adapters?. Are they threaded for the jets on in the I.D. What is the threading on the O.D. Does Aquamist make any plugs with the same threading as on the jets. I'm experimenting with jet location and I need to be able to plug the holes on the unused locations.
Reply With Quote
  #14  
Old 05-11-2004, 05:04 PM
marck_c marck_c is offline
Junior Member
 
Join Date: Oct 2004
Posts: 6
Default

Richard, how can I get a hold of a couple of those jet adapters?. Are they threaded for the jets on in the I.D. What is the threading on the O.D. Does Aquamist make any plugs with the same threading as on the jets. I'm experimenting with jet location and I need to be able to plug the holes on the unused locations.
Reply With Quote
  #15  
Old 06-11-2004, 01:11 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default

The ID IS 1/8 BSP 28tpi Parallel thread.
__________________
Richard L
aquamist technical support
Reply With Quote
  #16  
Old 08-11-2004, 10:08 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default

Quote:
Originally Posted by Richard L
The ID IS 1/8 BSP 28tpi Parallel thread.
I have made a typo - the OD is 1/8 BSP and NOT ID
__________________
Richard L
aquamist technical support
Reply With Quote
  #17  
Old 09-11-2004, 11:44 AM
JohnA JohnA is offline
Senior Member
 
Join Date: Nov 2003
Posts: 352
Default

Quote:
Originally Posted by Gelf
...Hi John, just like mention, your web site along with this forum have been a great source of info on clet closely related to the zlet and WI...

I'm currently experimenting with smaller nozzles, 0.4mm both before and after the compressor. Maybe the surge issue will be fixed now, we'll see.

My gut feeling at the moment is that Richard's recommendations on water volumes and activation pressures are a bit on the high side.
At least for well-intercooled engines! :wink:

I'd say someone should start with a 0.4mm nozzle at 1 bar, and take it from there.
Stock systems come with 0.5mm minimum and switch preset at 10psi. Too much water for a well intercooled 2 litre engine! Especially in the winter.
__________________
Cheers,

John

www.max-boost.co.uk
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:53 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.