waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > General Effects

Reply
 
Thread Tools Display Modes
  #1  
Old 28-07-2019, 02:25 AM
Bullet300 Bullet300 is offline
Junior Member
 
Join Date: Jul 2019
Location: Astralia
Posts: 1
Default Quench

Hey guys. New to the forum. I have been using Meth injection on various cars for years. I have just fitted a new setup on my current car and it has caused me once again to go down the rabbit hole looking for as much info as I can.

One thing that I can seem to find. Is there a rough general rule of thumb as to what percentage of methanol injection to fuel ratio that one might be more prone to start experience quench? I do realize that there are many factors that play into this but I am sure there would be a percentage where this would start to become more of a factor to consider.. I am only at 10% at the moment.
Thanks in advance
Reply With Quote
  #2  
Old 03-08-2019, 12:57 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Quench

If your car has a WBO2, you can run any % methanol up to 20-25% to fuel. Beyond this, you will need tp do some ECU tweaking.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:01 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.