waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-06-2018, 02:56 PM
playback playback is offline
Member
 
Join Date: Jun 2010
Posts: 32
Question HFS3 - GTI 5 Setup

Hi Richard,

I seem to have a bit of an issue where my car is far more rev's based to get the injection working than boost based.

If I am under full boost in 2nd or 3rd gear only high up the rev range like 4000rpm onwards does it kick in and start spraying.

If Im in 4th gear for instance and load the car at say 2500rpm/3000rpm this is dangerous as I only start getting injection a long time after it has hit full boost.

I have pictures of the setup but can't upload them. I could mail them to you.

How can I adjust it to be more boost based ?

If I adjust the threshold any lower then when cruising on the highway it stays injecting.

Any help would be much appreciated.

I want to get a more aggressive file loaded and need the water / meth to be running correctly for the new file.

Kind Regards John
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:43 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.