#1
|
|||
|
|||
No water level warning
Is there a way to adjust the water level sensor so that it come on when the sensor is down. Got everything else working. Just when the level is below the sensor I don't get any warning. But if I let it get to the point that air is in the like it get both led failsafe.
|
#2
|
|||
|
|||
Re: No water level warning
short across the two wires (black and yellow) on the pump harness, it should trigger the yellow led on the gauge. If it doesn't, check for breaks.
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: No water level warning
I got the sensor working now, Only problem is when shifting and the car rocks, The next gear water level fail safe happens. Is there a easy way to make it less sensitive? just the float.
|
#4
|
|||
|
|||
Re: No water level warning
there is a difference between failsafe and water level:
- Failsafe: both leds come on. - Low tank level: only the bottom led comes on. Which one is yours?
__________________
Richard L aquamist technical support |
|
|