waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > General Effects

Reply
 
Thread Tools Display Modes
  #1  
Old 12-09-2004, 10:39 PM
slowmike slowmike is offline
Junior Member
 
Join Date: Sep 2004
Posts: 1
Default 2D not working

I have been running the 2D on my WRX for approximately 15,000 mi. Been filling the tank with 50/50 water and methanol. Last week I noticed that the fault light has been coming on. I've never run the tank dry, fuses check, get lights in the FIA, nozzle not plugged and the pump works when I apply 12v to it. Any suggestions?
Reply With Quote
  #2  
Old 12-09-2004, 11:09 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default

The yellow warning lamp could be activated the the following problems:

1. Clogged nozzle
2. Low water pressure
3. Clogged filter
4. Air in the system.

Could you spray some water onto the windscreen with a spare nozzle and let me know the spray pattern.

It would be better if the post can be moved to aquamist section so it could be easily spotted by me.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:44 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.