#1
|
|||
|
|||
Mini Cooper S. What is best nozzle,threshold,etc
Is there any help to be had on correct configuration of my Hfs3 v3 kit using the HFS 2 switch.
My car.. Mini cooper S 220bhp (192whp) Boost at 15psi (stock boost about 10psi) Currently using 0.3mm hose tail jet (also have 0.4 and 0.5mm) Using Factory parameter threshold , gain etc at 12'0 clock Injectors 550cc - which are big injectors for the car in question. Usually around 380cc i think for 170bhp. I am currently seeing spikes of 40 degrees C on my OBD diagnostic display when at high revs and boost. The aquamist does not lower this twmperature spike with the above setup, though i have only used water so far. Can anyone help me choose the correct settings and hose size please? As an example: threshold at 10 o'clock, gain at 2 o'clock, 0.5mm tail hose. Thanks. Last edited by Brumbrum; 25-02-2015 at 05:39 PM. |
|
|