waterinjection.info  

Go Back   waterinjection.info > Other > Gallery - NEW

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 23-11-2010, 09:21 PM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Thumbs up Re: RICESP Water Injected RX7

Quote:
Originally Posted by RICE RACING View Post
Probes tested and fitted up, interesting note they 100% read lower than the much thinner exposed types I was using before (I estimate around 50deg C for same conditions with bench tests) will confirm in car in next week or so.

New mods and set up looks great fixed up all the little details I wanted to do since the major re-engineering of the initial set up she should be a rocket! I'll post up all the performance statistics sooner rather than later I hope........ I can't wait. The Ferrari F40 is going down !!!!
In the 1000km of testing completed to date the exhaust gas temperatures have not exceeded 880deg C. Completed a proper longer haul load test to top of 4th gear (8000rpm) to get the highest reading as well. Normally peak in 3rd is around 840deg C in a near static load condition. Front and Rear rotor read the same to 0.5 deg C.

On cruising on stoich fuel mixture setting or leaner the EGT is over 100deg C cooler than before (on old turbocharger specifications). Fuel economy is flat out amazing ! including regular performance tests I average around 10lt per 100km.
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:08 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.