waterinjection.info - Pump is activated after a while when the motor is not running

Page 2 of 2

Show 40 post(s) from this thread on one page

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Aquamist HFS-3 forum (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=34)

- - Pump is activated after a while when the motor is not running (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2026)

okkimi

20-07-2013 09:10 AM

Re: Pump is activated after a while when the motor is not running

Quote:

Originally Posted by inzunzar (Post 18763)

did he sent you a diagram?

Yes I did sent it.

okkimi

24-09-2016 07:12 AM

Re: Pump is activated after a while when the motor is not running

Here is the wiring diagram that I sent years ago.

Connect the Aquamist red wire to the pin 8 (green/yellow wire) in orange connector in the engine bay black box where the ECU is.

http://imgur.com/a/JTJWC

This works in european models.

Richard L

24-09-2016 08:07 AM

Re: Pump is activated after a while when the motor is not running

There is nothing wrong with the diagram. The red wire of the grey harness should be connected to D22.

Paulekas

17-10-2016 05:53 PM

Re: Pump is activated after a while when the motor is not running

My car does them same...

Richard L

19-11-2016 11:52 PM

Re: Pump is activated after a while when the motor is not running

check your wiring.

All times are GMT +1. The time now is 01:44 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page