waterinjection.info - Failsafe activated

Page 2 of 2

Show 40 post(s) from this thread on one page

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Aquamist HFS-3 forum (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=34)

- - Failsafe activated (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2511)

Richard L

14-09-2013 08:43 PM

Re: Failsafe activated

Do you have a checkvalve installed on the pre-turbo jet?

M3GTttHulk

15-09-2013 07:07 AM

Re: Failsafe activated

Quote:

Originally Posted by Richard L (Post 19400)

Do you have a checkvalve installed on the pre-turbo jet?

No checkvalves whatsoever

Richard L

15-09-2013 07:36 AM

Re: Failsafe activated

you might like to put a checkvalve inline to stop the fluid post FAV draining away due to pressure differentials. Upon activation, you will get a higher flow reading and trip the failsafe.

M3GTttHulk

15-09-2013 09:33 AM

Re: Failsafe activated

Quote:

Originally Posted by Richard L (Post 19405)

you might like to put a checkvalve inline to stop the fluid post FAV draining away due to pressure differentials. Upon activation, you will get a higher flow reading and trip the failsafe.

ok, sounds like a good idea. I am wondering if I should do without the pre-turbo jets. Specially now since winter is just around the corner.

Richard L

15-09-2013 12:01 PM

Re: Failsafe activated

I think you can leave it for the time being. Perhaps next April.

All times are GMT +1. The time now is 02:46 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page