waterinjection.info - Failsafe Kicking in

Page 3 of 3

Show 40 post(s) from this thread on one page

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Aquamist HFS-3 forum (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=34)

- - Failsafe Kicking in (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2502)

Richard L

31-08-2013 08:09 PM

Re: Failsafe Kicking in

what version is the HFS3?

jturnbull

31-08-2013 08:12 PM

Re: Failsafe Kicking in

Everything is in the default position excluding the jumper to disable the cel (DR1).

I*had it on for a good 20 seconds and the failsafe*was not*tripped.

I just disassembled and cleaned everything. Jets fav and didn't find any contaminants in the lines or valves. Put the spare jet on the windshield and it sprays as it should. Hooked the jets back up and went for a drive same issue.

Possible a bad FAV?

jturnbull

31-08-2013 08:13 PM

Re: Failsafe Kicking in

Quote:

Originally Posted by Richard L (Post 19315)

what version is the HFS3?

It is a HFS3-V3

Richard L

31-08-2013 09:09 PM

Re: Failsafe Kicking in

Can you link DFS (disable fail-safe) and let me know if it makes a difference.

jturnbull

31-08-2013 09:35 PM

Re: Failsafe Kicking in

Linked DFS and no change

Richard L

31-08-2013 09:48 PM

Re: Failsafe Kicking in

Can you pm me your phone number, may be it is easier to give you a call.

Richard L

02-09-2013 10:52 PM

Re: Failsafe Kicking in

update, problem has nothing to do with the aquamist system.

All times are GMT +1. The time now is 11:45 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page