waterinjection.info - RICESP Water Injected RX7

Page 39 of 51

« First

Last »

Show 40 post(s) from this thread on one page

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Gallery - NEW (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=30)

- - RICESP Water Injected RX7 (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=1590)

RICE RACING

27-04-2015 11:48 PM

Re: RICESP Water Injected RX7

Quote:

Originally Posted by Grant M (Post 21415)

Have you reached the max amount of boost to run on your engine or is there still more in it? Could you run more without having to modify your WMI?

What sort of torque are you making with the HP you are producing?

Funny you mention that, I got sick of playing around with the small EFR turbo's and have a new 100% custom turbo being made :) will post up a pic *maybe* :P

Grant M

28-04-2015 07:09 AM

Re: RICESP Water Injected RX7

Small EFRs?? Which one have you been using? Have you found they handle the heat just fine?

Turbo pictures are alway good:)

Are you still using the pectel/life racing ecu?

RICE RACING

28-04-2015 09:46 AM

Re: RICESP Water Injected RX7

Quote:

Originally Posted by Grant M (Post 21419)

Small EFRs?? Which one have you been using? Have you found they handle the heat just fine?

Turbo pictures are alway good:)

Are you still using the pectel/life racing ecu?

I have a few of the 9180's in various forms up to and including the 1.45AR turbine, I dont like them and they are a bit limited in power, especially once you have run larger turbos its hard to go back to a 'junior' unit.

Fucked off the Cosworth/Pectel items, they were a total rip off company to deal with. Nice product, shit company.

RICE RACING

07-05-2015 01:08 AM

Re: RICESP Water Injected RX7

The ULTIMATE!

http://i.imgur.com/DCqk7Dz.jpg

http://i.imgur.com/Oq23HKq.jpg

http://i.imgur.com/3aUH8th.jpg

RICE RACING

11-05-2015 11:11 PM

Re: RICESP Water Injected RX7

............

Grant M

12-05-2015 07:26 AM

Re: RICESP Water Injected RX7

Those stock rotors look bad!!!

Have you matched the rotors to the housings they're going into? Do they need balancing after you have to correct tollerances

RICE RACING

12-05-2015 09:35 AM

Re: RICESP Water Injected RX7

Quote:

Originally Posted by Grant M (Post 21466)

Those stock rotors look bad!!!

Have you matched the rotors to the housings they're going into? Do they need balancing after you have to correct tollerances

NO because once you start doing that then you need to reduce the lands as well, + apex seal lengths etc..... much better to throw rubbish housings in the bin and use good ones that are 80mm wide.

All engines I do are balanced after, but you can do this and not re balance and there is no sign of vibration or bearing wear, its a small amount of material removed.

RICE RACING

09-06-2015 12:28 PM

Re: RICESP Water Injected RX7

............

Grant M

09-06-2015 02:46 PM

Re: RICESP Water Injected RX7

Very nice. Do the side seals still need clearencing?

RICE RACING

09-06-2015 03:14 PM

Re: RICESP Water Injected RX7

............