waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Gasoline Forced-Induction (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=17)
-   -   Egt limited engine (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=1163)

Wolf_Tm250 13-12-2006 11:23 AM

Egt limited engine
 
Hello,
i am still a newbie of the wi... but i have the suspect it's an issue i could ask your advice for...

What would you do if you had an egt limited engine?

I mean, i still have boost (0.4 bar) to run with good turbo efficiency, but now i have skyrocket egt (950 C at valve exit = 1070 C at turbine inlet) at 2 bar and no det.

Any advancing of ignition timing ( to lower egt) gives me det.

Can I presume that:
- mine is end has det (cause it disappears when i retard ignition) ?
And that:
- i have my ppp way later than 14 deg atdc (cause my egt are so high) ?

So, afaik, my goal should be to fight end gas det... correct? So that i could advance a bit the timing to lower egt without having det.

For this purpose, what are your advices about wi?
Pure water, 50%meth?

Any other consideration or tuning advice?

Thank you...

Hic 13-12-2006 12:19 PM

wolf

contact me, you have my mail, I will help you ;)


All times are GMT +1. The time now is 06:39 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.