PN# for flow restrictors/connecters.
 

Hi,

Just purchased a used HFS-5 system with DDS3 V10, only used one month.
I'm one lucky guy!
I went over the kit and found that its missing some unique parts that I can't find part numbers for.
Can someone help me obtain these?

1-In line restrictors for HSV, the parts list claims it came with three.
2-The HSV retaining clip.
3-The connector and terminals for the water level sensor. [two pole]
I'm still in the process of learning this systems ability and features.

Question: Is the injecter pulse signal all that is needed for the system to work correctly. Not spraying until boosted?
Installing in OBDII fuel injected turbo engine.
Thank You. :D

You are one lucky people for sure. Dud he gave the reason why he was selling the kit?

If you like to download HFS-5 v10 user manual, you can use the following link:
http://www.aquamist.co.uk/V10/HFS-5-v10w.pdf

Call Jeff at Howerton Engineering, he should be able to help you out, he should have Aquamist spares.

Jeff Howerton
Howerton Engineering
707.685.6279

Answer to your question: you need injector pulse signal signal for sure. The system can be set to trigger by boost or IDC%. Read the user manual, it is all in there.

Richard

He sold the kit because he has a child on the way......wife made him :twisted:
I have been in contact with Jeff......Very helpful and we got it handled!!
Thanks for the reply!. :D