waterinjection.info - Water anti-freeze

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Gasoline Forced-Induction (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=17)

- - Water anti-freeze (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=1617)

Water anti-freeze

Hi,
what would you use as water anti-freeze in a plain water injection setup ?
Thanks.

I think methanol`s a good bet, maybe 20% as this shouldn`t drastically affect your tune/AFR`s.

Quote:

Originally Posted by keithmac

I think methanol`s a good bet, maybe 20% as this shouldn`t drastically affect your tune/AFR`s.

Will try, thanks...

Quote:

Originally Posted by keithmac

I think methanol`s a good bet, maybe 20% as this shouldn`t drastically affect your tune/AFR`s.

Just a question... is HFS-5 system meth ready ?!

Thanks...

Best check but I`m sure all the systems can take a 50/50 mix of wter and methanol?.

Quote:

Originally Posted by Wolf_Tm250

Quote:

Originally Posted by keithmac

I think methanol`s a good bet, maybe 20% as this shouldn`t drastically affect your tune/AFR`s.

Just a question... is HFS-5 system meth ready ?!

Thanks...

The Shurflo pump is methanol resistant (the "R" word), Unfortunately, prolong use of methanol will make the internal seal shrink, in time It will leak. For 100% mehtnaol, it last about a year. For 50:50, it is about 2 years. We have all the spares are available, it it not too costly, around $20-30 per item. normally you need to replace the #10 component (?30).

http://www.aquamist.co.uk/forum/rebuild.gif