waterinjection.info - Correct nozzle size and best nozzle location

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Gasoline Forced-Induction (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=17)

- - Correct nozzle size and best nozzle location (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2650)

bndynamix

30-07-2014 11:37 PM

Correct nozzle size and best nozzle location

Hi I have golf mk4 gti 1.8T k04 hybrid turbo 332hp, 600cc inj, 24psi, 3" maf, fmic. Using screen wash 30% meth
Thanks

Richard L

31-07-2014 08:11 AM

Re: Correct nozzle size and best nozzle location

What system do you have?

bndynamix

31-07-2014 08:47 PM

Re: Correct nozzle size and best nozzle location

Actually using devils own 200 psi pump and maf based progressive controller but have aquamist pipe work and have 4, 5 and 6mm aquamist jets.

Richard L

31-07-2014 09:33 PM

Re: Correct nozzle size and best nozzle location

The further away from the throttle the better.

The DO system is progressive but not linear. I would run a 0.6mm jet only. Large jet might over inject at low to medium load.

All times are GMT +1. The time now is 12:52 PM.