waterinjection.info - Correct Nozzle

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Gasoline Forced-Induction (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=17)

- - Correct Nozzle (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2750)

emanuel199

29-03-2015 04:54 AM

Correct Nozzle

Hi . I have a Fiat Coupe 2.0 20 v Turbo with
GTEC1 Chip
K&N Air Filter
FMIC
Bosch Super 4 sparks
Exhaust (Don?t Decat)

About 250 hp . What size of nozzle i must use ??

parmas

29-03-2015 10:29 AM

Re: Correct Nozzle

1 Attachment(s)

Nozzle Flow size rated in cc/min

Flr Power

30-03-2015 01:21 PM

Re: Correct Nozzle

That's the AEM recommended flow chart. Basically, this chart is on the high side of thing.

Richard L

30-03-2015 01:41 PM

Re: Correct Nozzle

Quote:

Originally Posted by emanuel199 (Post 21346)

Hi . I have a Fiat Coupe 2.0 20 v Turbo with
GTEC1 Chip
K&N Air Filter
FMIC
Bosch Super 4 sparks
Exhaust (Don?t Decat)

About 250 hp . What size of nozzle i must use ??

You cannot use the AEM chart on aquamist systems. the flow curve is totally different.
What wmi system do you have? We normally recommend 1-1.5cc/hp of M50:W50 mix.

All times are GMT +1. The time now is 05:04 AM.