size of water&temp
 

Smaller water particle makes more power. :lol: 10% more tested by g-tech.

Any more specific data wouldn't go amiss. :cool:
How did you measure the particle sizes anyway?

Injection tube is 12 mm in diameter. Water is not visible when it exist. Flow rates are 50 to 150 ml per. min for 400hp engine. None turbo 351c . With no timing change. 40 more hp. :shock:

Hard to see what sort of particle size we're talking here.

What was the pump pressure and what was the nozzle size?

size&water temp
 

1 1/2 psi. 034 nos jet. Injected under carb.

1.5 psi is negligible pressure, can you really inject fine mist with that?

Do you mean 1.5bar? (still low though)

Re: size of water&temp
 

After 4 more years of BS. Just found out my g-tech under estimates rwhp.
You need the right volume of steam and temps need too be controlled.