View Single Post
  #1  
Old 10-05-2008, 01:33 AM
codyace codyace is offline
Junior Member
 
Join Date: Jun 2007
Location: Stroudsburg, PA
Posts: 1
Default Pump and Resovior Installation Idea on my 240sx

I'm goign to be running my Aquamist 2c setup in conjunction with my Jim Wolf Tech Ecu.

I was thinking about mounting the pump and tank in the trunk of the car, however was unsure as to if that was to great a distance for the pump to push water (essentially from the trunk to just beneath the front passenger headlamp, where the intercooler pipe is.

I wanted to mount the kit someplace near the actual pipe, however there is no room, this side of being exposed in the engine compartment (which I do not want)

Any help is appreciated!

Thanks!

-Cody Ace
__________________
Cody Ace - 1997 240sx - SR20 Power - 400whp/330 ft lbs
Reply With Quote