Quote:
|
Originally Posted by Richard L
It will be easier to estimate the meth flow aganist the fuel flow.
I normally recommend the following:
- 100% water: 10-15% to fuel
- M50:W50 15-20% to fuel
- 100% methanol: 20-25% to fuel
(figures are based on knock free conditions)
Just total up your fuel injectors
|
I believe Richard is saying that you select a nozzle size where the added water/methanol by mass flow (#/hr) is 10%-15% of the fuel flow in #/hr. You are essentially feeding a fixed ratio of cooling/anti-knock fluid versus fuel