Okay,
with the .7 Nozzle, I am getting 270ml of fluid a minute. This leads me to believe that the pump is primed, and is doing its job. Again though, I only get water out of the Manifold block on start up, and not under boost.
It appears that all my wiring is correct. However, I will have to double check it as I could have missed something.
One thing that comes to mind is the extra white wire that is not used. There was 2 white wires. One is a ground, and the other not used. They were both identical. I just picked one to use as the ground. Could this have an effect? Am I supposed to use a specific white wire for this?
Anyways, still stumped, and still need help. So if you think of anything send it my way.
P.S. I want to buy a DDS system from you once my system is up and running. Can you email me with some details on that unit?
David
|