[lammarwell2]

I have had the Aquamist 2D system on my vehicle for a couple years now problem free until now. It acts as though it has a blockage somewhere in the line. When boost is engaged ( at 5psi) the pump runs non-stop like it is not getting any fluid or in prime mode. It runs until i pull the fuse or turn the truck off. I do not want to damage the pump so i have left the fuse out for awhile now. I took all
of the lines apart and checked for blockages, cleared the lines with compressed
air just in case and there appeared to be none. I then put it all back
together again and it still has the same problem. I changed out the pressure switch just in case it was the problem as well. If i run it without the line connected before its connected to the supercharger the fluid sprays out normally and it appears the pump is working fine. should I try another nozzle or?
Do you have any thoughts as to what the problem might be?