Nozzle size - Richard?
Hi Guys,
I am looking at 6 cylinder, port injection with 2d+FiA2. Been only 3.2L turbocharged motor, it's to see 950cc injectors installed.
I would need 6 nozzles, each to deliver water say around 10% to fuel(to start with). This gives me 95cc nozzle. Is there one around of this size? 0.4 is to deliver 160cc on race pump (i think is what I would need due to flow rate).
Also, assuming max duty cycle of fuel system of about 80%, I will flow 760cc X 6 injectors / 10 = 450cc/min peak water delivery. Will 2d system cope with it?
Anyone have any suggestions?
|