Thread: jets for 3sgte with 650 cc injectors
View Single Post
  #2  
Old 13-08-2010, 02:11 PM
zakshaker zakshaker is offline
Member
  
Join Date: Aug 2010
Location: Mauritius
Posts: 65
Default Re: jets for 3sgte with 650 cc injectors
So let's see if I have welldone my math
650*4=2600cc
90% = 2340cc max duty
20% jets = 468
PUMP 160 psi minus 22 psi BOOST = jet flow 138 PSI

So that would mean, if one jet would be used only I would need a 0.9mm which I would trim gain just a bit down.

and if I want to use 2 jets, then I need a 0.4 before IC and a 0.5 after. which I would also need to trim gain down a bit. or I could use two 0.4 jets that I would trim gain up.

In both case I would need to use a 0.7mm restrictor

am I right ?
Last edited by zakshaker; 13-08-2010 at 02:22 PM.
Reply With Quote