Quote:
Originally Posted by sep07
hi can any one help me with wiring up the fail safe to a turbosmart eboost street? sep
|
Iworktofish,
Thanks for the input.
sep07,
One of the two wires of the turbosmart send a PWM pulse to the inline valve. Locate this wire, cut and splice the brown and white wire between them
Preferrably the "brown" goes the the valve side and the "white" goes to the turbosmart controller side.
If the turbosmart displays a fault warning during a failsafe activation, link the "DR1" jumper link (dummy resistior). It brings in an artificial load inplace of the BCV.