[blk01s4]

S/N is 4125

Qestions:
1. Does your have have a RJ-45 socket at the back or a 2.5M trailing black cable
Both it has what appears to be an RJ45 and a trailing black cable

2. The flicking is not not be due to the RJ-connector. The earlier version of the DDS3v10 board is sensitive to noice at the +12V supply. Anyway, this is gone with the new cable.
I dont see how this could be because I can wigle the cable and cause it to happen. If I hold the cable at a certain angle it works all the time. problem was solved with a new cable but like I said which brings new problems along with it.

This cable is terminated with RJ-45 connectors right? Im not 100% sure because they look wider then normal.