[Grant M]

Don't worry about me copying your design as I will be sticking to the DlI system for some time until I can afford something as spectacular.

I have found the thread on pre turbo injection. I have read all of the first 20 pages only another twenty to go!!!!!!

What are your thoughts on this? Obviously I see that you point your WI nozzle at the centre nut if you turbo bur is there an ideal distance for this so that any slight large water droplets don't hit the fast moving outside edge of the inducer?

Also tour air feeds in from the side from your cold air antake box, does the incoming air not essentially push the water flow from the centre of the wheel to slightly off centre?