Thread: Can I use HFS-2 instead of HFS-3 for my 335i setup ?
View Single Post
  #2  
Old 21-09-2011, 08:30 PM
maxman maxman is offline
Junior Member
  
Join Date: Sep 2011
Location: Dallas
Posts: 15
Default Re: Can I use HFS-2 instead of HFS-3 for my 335i setup ?
Quote:
Originally Posted by Howerton Engineering View Post
If you don't have a way of manipulating the timing and fueling via a Piggyback, then you can dump boost to wastegate pressure with the HFS-3.
These cars do tune themselves to an AFR with what I call the lambda map, so if the injection were to stop, the car would correct itself to some degree. The issue is how fast would this happen and would any damage occur in the transition. This and your right foot would be the failsafes with the HFS-2.
I have a 335i with the N54 engine with a Cobb flash tune and I'm looking for a water/meth system. As such, I'm trying to decide between the HFS-2 and HFS-3 sytems.
Could you please elaborate on how the HFS-3 can dump boost to wastegate pressure?
__________________
........................................ ...................................
NOTE: Post count does not reflect any actual knowledge about anything (living or dead).
Reply With Quote