Thread: Problem with HFS-3 ::fixed::
View Single Post
  #3  
Old 23-10-2011, 08:14 PM
RB5108 RB5108 is offline
Junior Member
  
Join Date: Sep 2011
Location: Crawley
Posts: 9
Default Re: Problem with HFS-3
Hi Richard,

Finally got round to fitting the kit to the car, the hard pipes took a little longer to make! I'm using the RJ48 connector direct to the top of the injector Red + and green -, i'm not using the map sensor as stated optional.

The pump is fitted in the front wheel arch and has been siliconed around the power cables. I'll post some of the install pictures.

I will try and pop down in the morning if that's ok, I'll call before i leave rather than just turn up. The car is booked in friday for a live map but if need be i can postpone if required as im off until the 12th november.

Enjoy the pictures, I'm really happy with the install i've managed to do, the gauge in the vent took two attempts.... cocked the first one right up lol
Attached Images
File Type: jpg IMG_0733.jpg (91.7 KB, 7 views)
File Type: jpg IMG_0740.jpg (102.5 KB, 6 views)
File Type: jpg IMG_0763.jpg (92.3 KB, 7 views)
File Type: jpg IMG_0749.jpg (92.7 KB, 8 views)
File Type: jpg IMG_0750.jpg (92.2 KB, 6 views)
__________________
Revo tuned Focus MK2 RS pro alloy IC, pro alloy induction kit, pro alloy hard pipe kit, 750cc injectors, Mountune inlet plenum, forge actuator and dump valve sitting on H&R, HSF-3 fitted running 430/490lbft
Last edited by RB5108; 23-10-2011 at 08:27 PM.
Reply With Quote