the reason why I was spraying 80% by mistake is cause I accidentaly had the unit working as single stage while I though it was progressive. yes I did a fuel map and changed ignition timing. From what I have been dataloging. the system performed at its best when it was injecting 60% WM50. so this is my next plan
I will try to install 3 jets now
1 pre turbo (0.4mm)
1 after IC (1mm)
1 before throttle (0.6mm)
I have posted regarding preturbo jet location :
http://www.aquamist.co.uk/vbulletin/...?t=251&page=42