hello, im looking to purchase an hfs-3 kit for my 03 lancer evolution. i used to run e85 in the car but my station stopped selling so i figured its time to convert to meth.
what size jet would i use on my car? i would like to run 100% meth and i currently have 1450cc injectors. by looking at the how to on howerton engineerings site it seems like i would want to use 3 1.0mm jets. does that sound about right? does IDC also play a role into this? with 1450cc injectors im not expecting to max it out. my tuner is thinking that i should be roughly around 55% duty. should i multiply 1440*1.1=1595 for the 10% loss. should i then multiply 1595*.55 for the amount of injector that will actually be used? im a little lost with all this lol
when running more than one jet do you just T off the hose to each jet? if i have to run more than one jet which it sounds like i will i can just run the line up to the engine bay and T it off from there right?
im sure i will have more questions but these are just a few. like i said i havent even bought the system yet but i most likely will in the next two weeks or so.
any help is greatly appreciated. thanks
mitch