Quote:
Originally Posted by okswerve16
Richard, that is exactly why I want to use direct port to supplement the injectors and their lack of flow. Since there is no flow data for the injectors I will be using (rs4) how can I calculate nozzle size? Also since I am going to use the 1-4 splitter I will only need one filter before the splitter correct of what size micron? TIA!!
|
In that case, setting the system up is a lot easier.
There are two options on the filter front.
1. We manufacture a high pressure 130 micron inline filter (Picture below)
2. It is poossible to supply a jets with a 25micro internal filter. But it is only available on a 0.3mm jet. flowing about 100cc/min. We can put the same filter in a larger jet but the filter and clog up within a few months unless you put another 30 micron between the tank and pump. (pictiure below 2/3)
3. The HFS-4 comes with an in-tank 112 micron filter (picture 4/5)
