View Single Post
  #95  
Old 23-02-2012, 02:21 PM
thesalg thesalg is offline
Junior Member
 
Join Date: Feb 2012
Location: USA
Posts: 8
Default Re: HFS-4 Q&A, application for your engine...

Quote:
Originally Posted by Richard L View Post
The HFS-4 is well equipped with failsafe output for all the popular tuners on the N54 platforum:

JB4: ......... voltage based flow signal
Procede: ........... voltage based (PPS) and pulsed based (PWM)
Cobb/other flash tuner: ............. Boost cut for the time being. A map switch output if and when they come out with a MAP switch option.

The System come with two meth bungs (1/8 NPT), hust drill, tap and loctitle onto your current charge pipe). As you are US based. Jeff will look after you with the correct jets before despatch. (2x1mm + 1 spare of your choice). For this platforum, we recommend 2x 1mm jet, spraying approximately 800cc+/min of water/methanol mix.

Which part of US are you located and how did you hear of this GB?
Thank you Richard. I am in New York, USA. I heard about the GB by looking for an HFS-3 system and saw that HFS-4 had finally come out.
Reply With Quote