[vic@eurosport]

I just got a WI system and tested it out using a .06mm nozzle. When the system is connected to power the injector sprays a nice fine mist. My question is once the power is disconnected from the pump the water doesn't immediatly stop flowing, instead it sprays a small stream out for about 3-4 seconds and then starts to dribble for a couple more seconds.

Also the nozzle is mounted before the TB and this is on a 7psi turbo engine.

Is this normal or do I need to add something inling to stop this from happening???

Any help woulg be greatly appretiated.



Thanks guys,
Vic