Quote:
Originally Posted by Richard L
1. Running one jet requires changing the flow table (0+1) solder linked.
2. Adjust SC to read 6 bars with 0.6mm jet spray in open air
3. Set WL at 10am and WH at 2pm
With the DR1 linked. Let me know the results.
|
1. Already soldered.
2. 6 bars with jet in the air+sys jumper, or some other case?
3. Will try and let you know
DR1 is linked at the moment so I adjust SC when DR1 is linked? Do I need to link any other jumper different from factory default? Thx a lot