Re: A few questions concerning preTurbo water injection
Hi,
these IAT's are with aprox. 20?C ambient temperature. Intercooler seems to be very effective. The IATs are with water injection, but as i saied in my first post's they are not much higher without as well. A few degrees.
My IAT Sensor is by the way at half the way from the IC to the throttle, so the air in the intake runners may be a bit hotter, but under WOT Lambda control and IAT correction based on the IAT sensor Information shows that charge temps are correct.
I thank you very much for your Inputs. I will try a few ignition runs at the weekend.
unfortunatly don't have a smaller nozzle right now but will buy one as soon as i can.
|