[Richard L]

It appeared that you have done your home work - wish everyone will do the same.


Two staged jet is good because of the pulsating delivery and also less chance of a total blockage. However, it will not be as easy to detect a block jet unless both jets are blocked. Block/fault detection line will go to ground electrically, can drive up to 1A Load - higher load requires the use of a relay.

Depending on your battery location, if the battery is nein the trunk, Aquamist pump should also be in the trunk. Ideal position og the aquamist pump is nearest to the battery, tank position is not as important due to the presence of the priming pump.

Your w/f ratio will be determined by tuning and power output.

Send some pictures of the install please. I see if I can persuade the forum Boss to run a "Install Gallery".