oops I forgot to change the injector duty cycle to display %.
But anyhow, the max is still 3.2v max, and so this voltage signal is just telling me I cap it at maximum 6 bars. I did tried it at full all out 8 bars and it shoot up to 5v. So it doesn't represent the flow of the wmi, but just the flow bars signal of 0.5v per bar.
Gauge bars displaying 6 bars maximum, flow table 2, 2nd gear pull:
But I supposed what I really want to know is when did the voltage starts to move beyond 0.5v - as this gives me a good idea of when it really starts to inject some jungle juice. And I think this information is good enough.
Oh and by having it on table 2, I have to turn the SC to 2 o'clock. Should I just leave it or solder back links 1 and 2? I don't think it really matters though.