HSF-3 pump not working
Richard,
I recently had to replace my trunk wire, 6mm line and the +12 volt line, due to these lines being severed/cut into, I ordered new and installed however upon trying to purge my 6mm line using the Sys. test jumper from the FAV, the pump will not run, I contacted Jeff @ Howerton, he informed me it may be that due to the trunk wires being severed, I could have blown a transistor on the board that drives the relay. The pump does run when jumped straight to the battery, but neighter the old or the new relay will start the pump under Sys. test.
Please help
Ralph
|