Quote:
Originally Posted by parmas
If you have experience in steam injection, could you give us some clear information :
- What results did you get with and without steam injection
- Temperatures : Air / Engine(coolant) / EGT's
- AFR's used
- Detonation suppression
- Steam system brief explanation.. steam temps / pressure / flow / nozzles ?
- Engine technical details
Did you begin with steam injection or you have also tried water injection ?
|
about 35hp. no way of checking air temps or afrs. small boiler on exhaust gravity feed by .030 jet 26 inchs water pressure 3/16 break line to intake. 351c 9.5 comp. pump gas. 30 degre timeing back too back runs no timeing changeing gtech meter.