Re: Partial removal question, nozzles in the intake in particular.
Did you use an aquamist jet adaptor on you install? We supply a blanking plug with them.
It is not a good idea to allow oil laced air flow past the jet, it will clog it up is no time.
Depending on the size of the jet, you would be expected to see any major drop in boost as it doesn't let that much air flow pass it.
You plug up a M3 screw inside an inch length of a 4mm hose and push it into the hostail of the jet. Just a quick fix.
__________________
Richard L
aquamist technical support
|