Re: Water injection and water level lights after hitting threshold.
I've been having this same problem lately .. System was running great for a couple of months, started after removing the jets and running the system on the SYS jumper to flush the lines and reset the SC trimmer to read 6 bars at full flow ...
The system sprays as normal and flow bars show on the gauge but both yellow lights come on and disappear .... Also does not seem to happen all the time, some times the yellow lights wont come on after switching gears where the system goes to nil for a short period ..
I tried adjusting the SC trimmer again, then the WL and WH without use ...
What could trigger these lights and how can I fix this please?
|