Quote:
|
Originally Posted by chucktoo
All depends on how your wire up the signals to the FIA2.
My firing order is 1-3-2-4 so I drive one FIA with cyl 1 and the other with cyl 2 to spread the water out evenly over the complete cycle.
It was shown in other posts that yuo can diode OR cylinders [Fuel Injectors] together to get what ever you like.
I used dual HSV becuase I was afraid of pressure drops across it with large jets.
I wuld like to see pressure drop vs flow through an HSV [ Richard ? ]
this would tell us how much jet we can put on a valve.
I am using a Shruflo 140 psi pump at 135 psi so there is plenty of flow.
http://www.shurflo.com/pages/new_ind...0-813-239.html |
The HSV can flow around 700cc of water with approximately 0.7bar pressure drop (delta).