co-axial spray
I agree, a co-axial spray setup is one of the things I have been thinking about.
Imagine a carburator venturi type nozzle suspending centrally in the air intake. The high air speeds in the venturi should keep the spray as a relatively compact plume that should travel down the center of the duct, with the mist impacting the compressor impellers near the center where their radial speed is relatively small.
In my next version I will be only using the pre-compressor injection at high engine rpms and boost ( pressure switch and rpm switch in series ). I could do the same with some sort of a maf voltage, trigger as well.
Larry
|